PAINT STRIPPING
Industrial Paint Stripping That Restores Parts For Reuse
Industrial paint stripping solves this problem by removing coating build up and restoring parts to a reusable condition. For many businesses, that means extending the life of valuable production hardware, reducing the frequency of replacements and keeping operation running without unnecessary downtime
What is Paint Stripping?
Industrial paint stripping is the controlled removal of coating and paint build up from metal parts, paint line hardware, fixtures and industrial equipment. This can include the removal of:
- powder coating
- wet paint
- plastisol
- polymer build-up
- adhesives
- sealants
- carbonised residues
- other organic coating contamination
When Paint Build Up becomes a Problem
Loss of Fit & Tolerance
Poor Contact Points
Reduced Coating Quality
Increased Weight & Poor Handling
Higher Replacement Costs
Why Paint Strip Instead of Replace
Replacing reusable production hardware may appear to be the easy option, but once the real cost is considered, stripping the paint is often the better decision. Replacement usually means buying new hardware and waiting for delivery, which can often lead to delays. Usable metal parts are often scrapped when new hardware is installed whilst not guaranteeing the same process will need to be done in the future.Â
Paint stripping allows structurally sound components to be recovered and reused. This is especially valuable for hardware where a majority of the base components are unaffected, as there is no reason to replace it purely because of build up.
What can be Paint Stripped?
Paint Line Hardware
Booth & Process Equipment
Tooling and Engineering Parts
The Main Paint Stripping Methods
Thermal Paint Stripping
Thermal paint stripping uses controlled heat to break down coating layers so they can be removed from the underlying metal. This method is particularly effective for robust production hardware carrying repeated layers of paint or powder coating.
Why Thermal Stripping Works
The process allows heavy build up to be broken down efficiently without relying on aggressive mechanical abrasion. For suitable parts, this makes it an effective route for recovering reusable hardware. Thermal Stripping can be effective on heavy build up and is suitable for items that require repeated use.
Thermal Stripping must be properly controlled; temperature management is critical to reduce the risk of damaging or distorting the component. When the process is matched correctly to the application, it provides an effective route for removing tough coating build up while preserving the underlying metal.
Chemical Paint Stripping
Chemical paint stripping uses controlled chemistry to soften, dissolve or release coatings from the substrate. This route is often better suited to parts that are more intricate, more sensitive, or less suitable for a themal process.
Why Chemical Stripping Works
Chemical stripping can reach into areas that are harder to treat with more direct methods. It is often valuable where the part geometry makes full coating removal difficult. Chemical selection matters; the wrong choice can affect the substrate, so chemical stripping must be matched carefully to the coating system and base material.
Secondary Stripping After Cleaning
Paint Stripping is far from the end of the process; once the coating has been removed, the part may still require further cleaning before it can go back into service. In practice the part may need one or more of the following stages after stripping. There could residual material that needs removing, that can be removed through a process of rinsing, degreasing and drying.
Why Post Stripping Cleaning Matters
A stripped part may still carry ash, loosened residues, softened contaminants or process related debris. If the part is going back into coating, assembly or production, these remaining contaminants may need to be removed
Contract Paint Stripping Services
Not every business needs or wants to operate its own paint stripping process in-house. That, is where contract paint stripping come in. With contract processing, coated parts can be sent out for stripping, cleaned through the correct route, and returned ready for reuse, recoating or further finishing. For many businesses, contract stripping is the fastest and most practical route to getting reusable production hardware back into circulation.
When Contract Cleaning Makes the Most Sense
Contract paint stripping is often the right option when paint removal is only required periodically and urgent turnaround is required. It also makes sense to use contract paint stripping to validate the process before investing any capital into developing your own. Contract paint stripping is also suitable for one off jobs, scheduled processing and small batches.
Buy • Rent • Contract
BUY
RENT
CONTRACT
FAQs
What is industrial paint stripping?
Industrial paint stripping is the controlled removal of coatings such as powder coating, paint and polymers from metal parts so they can be reused, recoated or returned to production.
What types of coatings can be removed?
Powder coating, wet paint, plastisol, adhesives and polymer build-up can all be removed depending on the process used.
Why strip instead of replacing parts?
Because stripping restores usable components at a lower cost than replacement, especially for hooks, jigs and fixtures.
What industries use paint stripping?
Powder coating, manufacturing, automotive, aerospace and general engineering all use paint stripping where coating build-up affects reusable hardware or coated parts.
Can paint stripping improve production efficiency?
Yes. Removing build-up restores fit, contact points and coating consistency, which helps keep production hardware working properly.
Is paint stripping a cleaning process or a recovery process?
It is both. It removes coating contamination while restoring valuable reusable hardware.
What materials can be stripped?
Primarily steel and aluminium, provided the process is matched correctly to the application.
Can multiple coating layers be removed?
Yes. Heavy build-up and repeated coating layers can often be removed successfully.
Does paint stripping damage parts?
Not when the correct process is selected and properly controlled.
Can stripped parts be reused immediately?
Sometimes, but often they require further cleaning, inspection or preparation depending on what happens next.
What is thermal paint stripping?
Thermal paint stripping is a controlled heat process used to break down coatings for removal.
When is thermal stripping best?
It is typically best for heavy coating build-up on hooks, racks, jigs and robust production hardware.
What is chemical paint stripping?
Chemical paint stripping uses controlled chemistry to dissolve or release coatings from the substrate.
When is chemical stripping better?
It is often better for more complex geometries, internal areas and parts that require a gentler process.
Can thermal stripping distort parts?
Only if the process is poorly controlled. Correct temperature management is essential.
Can chemical stripping damage materials?
Only if the wrong chemistry is used. Correct process selection is critical.
Which method is best for powder coating?
Thermal stripping is commonly preferred for heavy powder coating build-up on robust reusable hardware.
Can both methods be combined?
Yes. Depending on the part and condition required after stripping, a job may involve more than one stage.
Does chemical stripping reach internal areas?
Yes. This is one of its main advantages.
How do you choose the right stripping method?
The decision depends on coating type, substrate, part geometry and the finish required after stripping.
Applications FAQs
Can hooks be paint stripped?
Yes. Hooks are one of the most common industrial paint stripping applications.
Can racks and jigs be stripped?
Yes. These are widely used applications in coating and manufacturing environments.
Can hangers and chains be processed?
Yes. Hangers, chains, carriers and flight bars can all be suitable for stripping depending on the process.
Can floor grids and filters be stripped?
Yes. Paint booth-related components such as floor grids and filters may also be processed where appropriate.
Can tooling be stripped?
Yes. Tooling is often stripped for refurbishment, reuse and maintenance purposes.
Can tanks and process equipment be stripped?
Yes. Depending on material and contamination, paint-related process equipment may be suitable for stripping.
Can aluminium parts be stripped?
Yes. Aluminium can often be processed using the correct controlled route.
Can steel parts be stripped?
Yes. Steel is one of the most common substrates handled in industrial stripping.
Can machined components be stripped?
Yes. Where the process is controlled correctly, machined components can be stripped without affecting useful tolerances.
Can stripped parts be recoated?
Yes. Recoating is one of the main reasons customers use paint stripping services.
What happens after paint is removed?
The part may require rinsing, residue removal, inspection, degreasing or drying depending on the application.
Do parts need degreasing after stripping?
Often yes, especially before recoating or assembly.
https://degreasingmachines.com/industrial-parts-washers-the-complete-guide/
What cleaning methods are used after stripping?
Spray washing or immersion cleaning are common follow-on options depending on the required finish.
https://degreasingmachines.com/spray-washing/
Is rinsing important?
Yes. It is particularly important after chemical stripping.
Can parts be dried after stripping?
Yes. Air drying or heated drying may be used depending on the process.
Is blasting required after stripping?
Sometimes. It may be used to remove final residues or prepare the part for further processing.
Can stripping be part of a full cleaning process?
Yes. It is often one stage within a broader cleaning and finishing route.
Can contamination be fully removed?
Yes, provided the correct stripping and follow-on cleaning stages are used.
Does stripping restore original dimensions?
It removes build-up and helps return the part closer to its intended working condition.
Can stripped parts go back into production immediately?
Once cleaned, checked and confirmed suitable, yes.
What is contract paint stripping?
Contract paint stripping is outsourcing the stripping process to a specialist provider.
Why use contract stripping?
It avoids capital spend, provides fast turnaround and gives access to an established process.
Can small batches be processed?
Yes. Contract stripping can suit both small and larger quantities.
Can urgent jobs be handled?
Often yes, depending on the size of the job and available capacity.
Is contract stripping suitable long term?
Yes. Many businesses use contract stripping as an ongoing service.
Can mixed parts be processed?
Yes, although the correct route may vary depending on the item.
Do you offer trials?
Trials or initial assessments can be used to validate results and confirm process suitability.
Is transport available?
Transport options depend on the requirement and job size.
Can contract stripping reduce downtime?
Yes. It can return usable parts faster than waiting for replacements.
Is it cheaper than replacing parts?
In many cases, significantly.
When should I outsource paint stripping?
When demand is variable, capacity is needed quickly or you want no capital investment.
When does it make sense to bring stripping in-house?
When volumes are high, continuous and central to operations.
Can stripping lead into wider cleaning systems?
Yes, especially where washing, degreasing and finishing are also required.
https://degreasingmachines.com/applications/
Can I integrate paint stripping with degreasing?
Yes, particularly where parts need to be returned cleaner before recoating or assembly.
https://degreasingmachines.com/industrial-parts-washers-the-complete-guide/
Can I start with outsourcing and move to equipment later?
Yes. This is a common progression.
Can stripping reduce operational costs?
Yes. It reduces replacement spend and helps recover usable hardware.
Can stripping improve coating consistency?
Yes. Restoring proper contact and positioning supports more consistent coating performance.
How often should parts be stripped?
That depends on the rate of build-up, the type of hardware and how the item is used in production.
What factors affect stripping performance?
Coating type, coating thickness, material, geometry and process control all affect performance.
What information is needed for a quote?
Part size, substrate, coating type, volume and the condition required after stripping are usually the key details